Sunday, October 19, 2014

WALTON PRIMO G3 official firmwere


ROM Mobile WALTON PRIMO G3 – ROM Android 4.2.2
Update Official ROM WALTON PRIMO G3 Version: WBW5882WA_0301_T5353_eng.znsj_bianyi4.1374809599
Android 4.2.2
Android 4.2.1
Official ROM WALTON PRIMO G3 Version: WBW5882WA_0301_T5182_eng.znsj_bianyi3.1368444100
Gapps include – No rooted
Language support : EN/CN

Install ROM:
1. Install driver.
2. Open Flash Tool
3. Open Download Agent and select MTK_AllinOne_DA
4. Open scatter_loading and select scatter file
SW—> MT6589_Android_scatter_emmc
5. Click Firmware->Upgrade and connect USB cable with mobile without battery
6. Insert Battery then start downloading..
7. When it shows Firmware Upgrade , then installation is completed.
After Firmware Upgrade give Reset to Factory Setting


Walton Primo C1 official firmwere

walton d3 official firmwere 100% safe with resume

walton c2 official firmwere with tools 100% tested

Friday, October 3, 2014

HYUNDAI A7HD official Firmware Dowload Android™ 4.0.3 ICS

Ainol Paladin Knight official firmwere

LiveSuit v1.7 Tool/Utulity update 1.7

RK (Rockchip) Tool/Utulity update

Ainol Novo 7 Crystal II official firmwere

ONDA VI30 Deluxe official firmwere

symphony xplorer w69Q firmwere with tool 100% work

nstall ROM:

- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6577_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
   –> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.

- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !

- You can now safely disconnect your phone and turn it on.

download under link

How to Flash/ROM update your China Android

How to Flash/ROM update your China Android Smartphones

Beginner’s Guide: Flashing your China Android Smartphones
Hello all,
This is a republishing of a beginner’s guide on flashing, it has decided to make this a lot easier to understand because a lot of people have had difficulty doing the procedure, also this article contains update guides on the process.

NOTE: Do at your own risk, and remember the needed precautions when doing this procedure, and also more importantly “DO AT YOUR OWN RISK”

There are actually 2 steps in flashing your phone into a newer firmware.

  • Card flash
  • Cable flash

1. Card Flash

CARD FLASH: Which means using your SD Card to install the firmware, much easier and least risky, however, you need to have the recovery installed.

Micro SD Card, preferably at least 4 GB
Battery, fully charge or not below 70%

  • Your ROM (in zip format) send it to your SD card, Remember not to unzip, and make sure your SD card is not corrupted (blank is preferable).

  • Turn off your phone, insert SD Card.

  • Insert Battery, Enter RECOVERY MODE (Normally done by pressing Power Button and Volume – Key Simultaneously) Or you may use Volume Up (+) depending on your device. Hold for 8 secs until you go to Recovery Mode (Menu System with Dark background)

  • When you enter Recovery Mode, You will see options (see image below). Touch Navigation doesn’t work, instead Volume Up and Down key and Power Button for confirmation or enter.

  • First you need to wipe data and also data caches before flashing.

  • Then choose install zip from SD card and Confirm (power button)

  • After that your new ROM will be flashed to your phone, remember that if the ZIP is corrupted, security measures “installation will be aborted” or if your are trying to flash the wrong ROM.

  • Reboot your phone

NOTE: if you encountered an error where your SD card is not recognized or detected by the phone, please wipe the data or format your SD card (blank) send ROM back again to SD card and then insert on phone.

2. Cable Flash

CABLE FLASH: Is much more complex and riskier. When is it used? For example, a ROM update from Android 4.0 ICS to Android 4.1.2 or 4.2 Jellybean. Where you need to install a completely new system from scratch. In this area Card Flash is practically useless.

Battery, fully charge or not below 70%
Computer (windows 7, haven’t tested with Windows 8)
ZIP File (rename it in English)


  1. Install msxm16 or 6575/6577 USB Driver (older) for dual core versions
  2. Install USB Driver, try to connect Phone and PC, see if it is detected (go to device manager), if not, reinstall and reboot pc.
  3. Extract Flash tool (newest one for MT6589) SP_Flash_Tool_v3.1304.0.119 or later
  4. NOTE: Flash tool is soooo buggy, sometimes it works, and other times doesn’t. If it doesn’t work, you need to install a newer one or sometimes a previous version works. Extract ROM on desktop (you may place all the files on the desktop to make it easier).
  5. Remove battery from phone, SD Card
  6. Open Flash tool.exe, click Scatter loading and look for “MT6577_scatter_emmc.txt” all files should be ticked.
  7. NEWER ROMS (“Samsung5410_Android_scatter_emmc”), doesn’t allow you to continue, please rename to “MT6589_scatter_emmc.txt” (if you have a MT6589 phone). it should look like this “MT6589_Android_scatter_emmc.txt”
  8. Click firmware Upgrade, Insert Battery (do not start phone) and connect your phone to pc via USB. and leave it be
  9. Wait until the green circle shows (please do not interrupt) firmware update is done and now you

Q: Flash tool error with (“Samsung5410_Android_scatter_emmc”) doesn’t start
A: Rename it please to “MT6589_Android_scatter_emmc.txt” (if your phone uses MT6589, if not, use MT6577)
Q: Can’t Start Up the flash tool
A: Close it, or you may need to restart your computer, and make sure the folder name is all in English
Q: Shows nothing after clicking fimware upgrade
A: Please reinstall driver, reboot, and free USB port with other peripherals.
Q: Flash tool recognizes but seems to have problems flashing,
A: Like i said, it’s very buggy, so you need to use another flash tool (preferable a newer one especially for MT6589 phones)
Q: Upgrade but stuck at 50 or 76% or any percentage.
A: Click stop, you may reflash again, don’t worry this doesn’t brick your phone, Make sure the battery has more than enough juice in it.
Q: Startup Stuck or nonresponsive after rebooting.
A: Wait at least 3 minutes, Reinsert battery and start again, if not, Reflash (ive experience this before, and reflashing did the trick)
Q: What is the scatter file?
A: Check image below

A: Image Below